Available in desired PAL-PANTONE colors, EKAPAH has a high elasticity, thin mesh polyester netting carrier made of elastomeric resin.
High elasticity EKAPAH Felt has a felt conveyor with the middle part, made of elastomeric resin in desired colors (RAL, PANTONE). Through its felt carriers, it adapts very well with liquid waterproofing products and forms a seamless insulation layer.
Waterproofing product is applied to both sides of the joint or crack (the middle part should be about 5 cm) and the EKAPAH band is put on when dried. Felt parts should be pressed by roller or brush to ensure full contact with waterproofing layer. After the waterproofing product dried, a second layer should be applied to seal the felt portion between the two layers. It should be noted that the middle part of the band should not stick to the insulation layer. Thus, the band can bridge the movements of the structure. Cracks larger than 3 mm must be filled with suitable mastic before application.
Tensile Strength (Transverse)
Tensile Strength (Longitudinal)
Maximum Load Elongation (Transverse)
Maximum Load Extension (Longitudinal)
Water Pressure Resistance
No cracking at -30 ° C
30 / +90°C
120/70 - 150/100
*İstanbul Technical Univercity Report Num: 221a/09.03.20l6
White box in package (10 rolls / each roll 50 mt) 500 mt
24 months - in dry and cool environment, in unopened original packaging.
Internal Corner - External Corner